Monday, April 11, 2022

No joy in Mudville

No joy on the brake pedal position sensor.

I got it installed. Pulling out the seat made the job doable.

While the seat was out, I greased the track with diffy-lube and now it is a breeze to slide back-and-forth.

However, the new part did not fix the problem.

Time to spend some money and have a pro look into it.

Posted by at

5 comments:

  1. RogerApril 11, 2022 at 5:10 PM

    I have been through three of those switches on one occasion. That was on a 95 Chev. C1500 PU. Finally got one that worked.

    ReplyDelete
  2. Old NFOApril 11, 2022 at 9:35 PM

    Well, at least you can tell him what 'didn't' work...

    ReplyDelete
  3. ghostsniperApril 11, 2022 at 10:02 PM

    Hate it when that happens.

    ReplyDelete
  4. retired wrenchApril 12, 2022 at 9:24 AM

    My bad, I thought your vehicle had a conventional brake lite switch. A brake pedal position sensor usually has to be calibrated with a Tech2 or similar device. The emergency flashers and turn signals lite the rear blubs? Allan

    ReplyDelete
  5. retired wrenchApril 12, 2022 at 9:24 AM

    This comment has been removed by the author.

    ReplyDelete

Readers who are willing to comment make this a better blog. Civil dialog is a valuable thing.

Subscribe to: Post Comments (Atom)