I weighed the wood I brought in today before we started burning. I had 20 lbs-4 oz and we got a five-hour burn out of the wood.
Our burn-rate came to just a freckle more than four-pounds-per-hour. The living-room (call it 700 square-feet) went from 66F to 75F while the outside temp is 24 and there is no wind.
***
![]() |
| Those brownish cylinders that are approximately the size and color of cooked possum guts are the hand-rolled noodles. |
I remember going to a cabin with my dad once and there was not much in the way of groceries. He made something that I remember him calling "Gleece", or at least that is how my 9-year-old ears heard it. It was basically little balls of bread dough (minus the yeast) that was rolled between the palms of our hands into "worms" and dropped into boiling soup.
The magic of the internet brings us this. Close enough for government work.
Dad's people spoke German. His mother was from the Baltic regions based on a congenital disorder she had. His father was from the southeastern corner of the Austrio-Hungarian empire.
I gave it a whack. I used whole-wheat flour but I am sure almost any ground grain would work, masa, buckwheat, barley, rye-flour...
Cheap and filling. And if you are hungry, delicious.
Taco/chili seasoning
I have been using a modified version of a taco seasoning I stole from All Recipes.
- One tablespoon commercial chili powder
- One teaspoon non-iodized salt
- One teaspoon black pepper
- One teaspoon onion powder
- One teaspoon ground paprika
- 1/2 teaspoon cayenne pepper
- 1/4 teaspoon ground, dried garlic
- 1/4 teaspoon dried oregano
- 1/4 teaspoon star anise powder (freshly made)
This version has less cumin and more cayenne than the All Recipes version. A few other measurements were tweaked as well. There really is no "right" or "wrong" combination. It is a matter of what doing what you and your family like and having a basic, versatile mix that saves time.
I have been using one tablespoon per pound of meat but will be dialing back a little bit in future ventures.
Rose seeds
I found some donor plants for rose seeds. Three of them were in front of the Arby's in Charlotte, Michigan. Another was in a garden in front of a hospice (I only pilfered two hips from that bush). A third donor was located in southeast Eaton Rapids and I will ask permission before liberating some hips.
Comments on the "Dumb Question" post
Thanks a million to everybody who commented on that post. The comments were 20X times better than what I wrote. I sent the link to Belladonna and suggested that she read it (and the comments).
In the past, she has been bruised by "favoritism" and I think the comments will be useful to her to give her a focal plane to snap what happened into focus.
Sixty Month Goals
The ever-lovely and brilliant Mrs ERJ and I are going through the process of hammering out our sixty-month goals. People without goals never know when they have arrived or if they need to make corrections to the course they are steering.
I keep having little sub-goals sneaking into my brainstorming list. For instance, I want to catch, clean and eat at least 12 meals of local fish per year. That would be 24 "plates" of fish between Mrs ERJ and I.
I am not sure I can talk Mrs ERJ into carp but I could catch one and use it for cut-bait and catch a mess of channel cats. Between that and panfish it is hard for me to imagine that I would fail to catch that much fish in four-to-six outings.
Rust remediation
An earlier post talked about a .308 Winchester with a rusty barrel.
A short session of shooting suggested that the rust was mostly on the exterior of the barrel and that the rifling was "good enough".
I spent part of this weekend sanding down the outside of the barrel that was rusty and then spray-painting with "cold galvanizing" primer and then flat-black enamel. The primer is usually much cheaper locally than it is over the internet.
Most rifle barrels are now painted rather than "blued". Bluing is a form of oxidization. That oxide coating is then impregnated with oil.
Even though it sounds like heresy to paint a rifle barrel, consider how long the paint on automobiles lasts. Given a good surface treatment (phosphating), primer and then UV resistant color-coat, there is no reason the exterior of a rifle barrel cannot be as corrosion resistant as the hood of a Toyota. One tip is to use primers and color coats from the same manufacturer as there is a better chance you will avoid an unfortunate incompatibility.
And there is absolutely no law that prohibits you from coating the final coat of paint with a rust-inhibiting oil to seal any cracks, pinholes or other imperfections in your paint job.
.jpg)
.jpg)




